Film capacitor CBB81 2KV 122J high frequency capacitor made in china

  • Series: CBB81
  • Tolerance: ±5% (J) ±10% (K)
  • Size: 25.0*16.0*9.5*0.8mm
  • Application field: General
  • Packing: Through hole


Film capacitor CBB81 2KV 122J high frequency capacitor made in china

The film capacitor CBB81 2kv has low damage factors, high insulation resistance, good self-healing properties and long life. It is suitable for color TV S correction circuits that require small size and excellent performance.

Film capacitor CBB81 2KV 122J high frequency capacitor made in china

ltem Characteristics
Reference standard GB 10190
Climatic Category 40/85/21
Rated Voltage 2000V
Capacitance 0.0012UF
Capacitance Tolerance ±5%(J) ;±10%(K)
Voltage proof 2.0UR (2S)
Dissipation Factor ≤0.001 (20°C, 1KHz)
Insulation Resistance



Size of CBB81 Film Capacitor

CBB81 122J 2000V Film Capacitor
W: 25.0mm
H: 16.0mm
T: 9.5mm
P±1: 18.5mm



Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us


Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH



Go to Top