Buy CBB81 small loss capacitor 1000V153J

  • Type: Film capacitor
  • Voltage: 1000V
  • Size: 19.0*16.0*8.5*0.6mm
  • Electric capacity range: 0.001~0.018uf
  • Application areas: household appliances

Description

Buy CBB81 small loss capacitor 1000V153J

The CBB81 small loss capacitor has strong resistance to high voltage, high frequency, and overcurrent. The biggest difference from ordinary polypropylene capacitors is that the polypropylene and aluminum foil are wound in series, which is why it can withstand high voltage.

Buy CBB81 small loss capacitor 1000V153J

ltem Characteristics
Reference standard GB 10190
Climatic Category 40/85/21
Rated Voltage 1000V
Capacitance 0.015UF
Capacitance Tolerance ±5%(J) ;±10%(K)
Voltage proof 2.0UR (2S)
Dissipation Factor ≤0.001 (20°C, 1KHz)
Insulation Resistance

≥25000MΩ

20°C,1min

Size of CBB81 Film Capacitor

CBB81 Film capacitor

CBB81 153J 1000V Film Capacitor
W: 19.0mm
H: 16.0mm
T: 8.5mm
P±1: 15.0mm

Film capacitor

Applications

CBB81 Film capacitor

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

Title

Go to Top