- Type: Film capacitor
- Withstand voltage: 2.0UR (S)
- Electric capacity range: 0.001~0.018uf
- color: red
- Warranty: Unconditional replenishment
CBB81 polypropylene high voltage film capacitor 392J1250V factory
Description
CBB81 polypropylene high voltage film capacitor 392J1250V factory
The CBB81 polypropylene high-voltage film capacitor has an internal series non-inductive structure and is encapsulated with flame-retardant epoxy resin. The pins are unidirectionally lead out. It has the characteristics of low loss, high insulation resistance, and high voltage and pulse current.
CBB81 polypropylene high voltage film capacitor 392J1250V factory
| ltem | Characteristics |
|---|---|
| Reference standard | GB 10190 |
| Climatic Category | 40/85/21 |
| Rated Voltage | 1250V |
| Capacitance | 0.0039UF |
| Capacitance Tolerance | ±5%(J) ；±10%（K） |
| Voltage proof | 2.0UR (2S) |
| Dissipation Factor | ≤0.001 (20°C, 1KHz) |
| Insulation Resistance
≥25000MΩ |
20°C，1min |
Size of CBB81 Film Capacitor
CBB81 392J 1250V Film Capacitor
W: 20.0mm
H: 12.0mm
T: 7.0mm
P±1: 16.0mm
Applications
FAQ
Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?
A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.
Q: How to judge the quality of the film capacitor?
A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.
2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.
3) Do simulated life test.
Contact Us
Email: filmcap@xuanxcapaciors.com
Ph/(whatsapp): +86-18825879082
Skype: Coco.PSH
Website: xuanxcapacitors.com
